Co-utilisation of recycled ceramic waste and sawdust in refractory bricks: thermal–mechanical trade-offs and resource recovery potential

Abstract

The growing demand for low-cost and eco-friendly refractory materials has generated interest in locally available waste materials as alternatives to conventional refractories. This study investigates recycled ceramic waste and sawdust in refractory bricks, assessing their trade-off between mechanical strength and thermal insulation. Five formulations were prepared by maintaining clay at 35 wt% and varying the ceramic waste-to-sawdust ratio before firing at 1100 °C. The bricks were evaluated for water absorption, compressive strength, thermal conductivity and dimensional stability at 1100 °C. Water absorption increased from 7.8% to 22.4% as sawdust increased from 0 to 20 wt%, while compressive strength and thermal conductivity decreased from 18.6 to 6.7 MPa and 0.92 to 0.38 W/m·K, respectively. These trends are consistent with the proposed pore-forming effect of sawdust during firing. The formulation containing 55% ceramic waste, 35% clay and 10% sawdust provided the most balanced performance, with 12.8 MPa compressive strength, 0.63 W/m·K thermal conductivity, 13.9% water absorption and no visible deformation or cracking at 1100 °C. The findings demonstrate a thermal–mechanical performance envelope from redistributing a fixed 65% waste-derived fraction between ceramic waste and sawdust, indicating resource-recovery potential while recognising the need for further environmental and service-level assessment.

Description

Citation

Ndyabijuka, P., Atwijukire, E., Mutanda, H. E., Najjobyo, J., Gumoshabe, J. K., & Mbabazi, J. (2026). Co-utilisation of recycled ceramic waste and sawdust in refractory bricks: thermal–mechanical trade-offs and resource recovery potential. International Journal of Sustainable Engineering, 19(1), 2746972.

Endorsement

Review

Supplemented By

Referenced By

Creative Commons license

Except where otherwised noted, this item's license is described as Attribution-NonCommercial-NoDerivatives 4.0 International