Co-utilisation of recycled ceramic waste and sawdust in refractory bricks: thermal–mechanical trade-offs and resource recovery potential
| dc.contributor.author | Ndyabijuka, Pathias | |
| dc.contributor.author | Atwijukire, Ernest | |
| dc.contributor.author | Mutanda, Hosea Eridadi | |
| dc.contributor.author | Najjobyo, Josephine | |
| dc.contributor.author | Gumoshabe, Joyce Kayanja | |
| dc.contributor.author | Mbabazi, James | |
| dc.date.accessioned | 2026-11-17T07:56:48Z | |
| dc.date.issued | 2026 | |
| dc.description.abstract | The growing demand for low-cost and eco-friendly refractory materials has generated interest in locally available waste materials as alternatives to conventional refractories. This study investigates recycled ceramic waste and sawdust in refractory bricks, assessing their trade-off between mechanical strength and thermal insulation. Five formulations were prepared by maintaining clay at 35 wt% and varying the ceramic waste-to-sawdust ratio before firing at 1100 °C. The bricks were evaluated for water absorption, compressive strength, thermal conductivity and dimensional stability at 1100 °C. Water absorption increased from 7.8% to 22.4% as sawdust increased from 0 to 20 wt%, while compressive strength and thermal conductivity decreased from 18.6 to 6.7 MPa and 0.92 to 0.38 W/m·K, respectively. These trends are consistent with the proposed pore-forming effect of sawdust during firing. The formulation containing 55% ceramic waste, 35% clay and 10% sawdust provided the most balanced performance, with 12.8 MPa compressive strength, 0.63 W/m·K thermal conductivity, 13.9% water absorption and no visible deformation or cracking at 1100 °C. The findings demonstrate a thermal–mechanical performance envelope from redistributing a fixed 65% waste-derived fraction between ceramic waste and sawdust, indicating resource-recovery potential while recognising the need for further environmental and service-level assessment. | |
| dc.identifier.citation | Ndyabijuka, P., Atwijukire, E., Mutanda, H. E., Najjobyo, J., Gumoshabe, J. K., & Mbabazi, J. (2026). Co-utilisation of recycled ceramic waste and sawdust in refractory bricks: thermal–mechanical trade-offs and resource recovery potential. International Journal of Sustainable Engineering, 19(1), 2746972. | |
| dc.identifier.uri | https://ir.must.ac.ug/handle/123456789/4753 | |
| dc.language.iso | en_US | |
| dc.publisher | International Journal of Sustainable Engineering | |
| dc.rights | Attribution-NonCommercial-NoDerivatives 4.0 International | en |
| dc.rights.uri | https://creativecommons.org/licenses/by-nc-nd/4.0/ | |
| dc.subject | Refractory bricks | |
| dc.subject | ceramic waste recycling | |
| dc.subject | sawdust | |
| dc.subject | waste valorisation | |
| dc.title | Co-utilisation of recycled ceramic waste and sawdust in refractory bricks: thermal–mechanical trade-offs and resource recovery potential | |
| dc.type | Article |
Files
Original bundle
1 - 1 of 1
Loading...
- Name:
- Co-utilisation of recycled ceramic waste and sawdust in refractory bricks thermal–mechanical trade-offs and resource recovery potential.pdf
- Size:
- 925.76 KB
- Format:
- Adobe Portable Document Format
License bundle
1 - 1 of 1
Loading...
- Name:
- license.txt
- Size:
- 1.64 KB
- Format:
- Item-specific license agreed upon to submission
- Description: